Bathroom Sink Stand Made Out Of Plywood
Recently, Ernie did some work on the bathroom. Our bathroom has been in pieces for 2 years. It has taken us that long to dismantle, design, choose, and buy the stuff we needed to finish the project.
Actually I am not really complaining. Our favourite thing when doing a project is to do it slowly. And that we did. We did that because we didn’t want to make any mistakes.
In the picture below, Ernie is varnishing the sink stand. He made it out of Maple plywood. We stained it with dark stain and then varnished it with water soluble varnish.
The next picture is the bathroom mostly done. The sink was purchased at a hardware store and was really the only choice we had and it was in stock in the store. If we had to do it again, I would either order one that we knew was eco-friendly – if such a thing exists, or we would make our own out of something recycled. The plumbing is not done i the pic that is why there is a rag hanging out of the wall. Obviously the sink tap is not cheap. We have found that often you get what you pay for so we spent some money on that.
The ceramic wall tiles were left overs at the store and they had enough for this surround. Ernie bought pine panelling for the wall behind the sink and a small section on the other end of the bathtub. This will be varnished with the water-soluble varnish as well. Just as an aside, the mirror in the picture was salvaged and Ernie made the frame from scrap wood. I varnished it.
So from a homesteading perspective, I feel we did the best we could on the recycling/reusing side and the not spending too much side. Ernie did all the work himself and did it at a relaxed pace, not stressing himself out at all. It took several weeks but was worth the wait.